Aluminium 2024 t3 Data Sheet
This is the introduction of HAOMEI aluminium 2024 t3 data sheet including alloy composition, specification, physical properties, chemical properties and application area.
Alloy composition of 2024 T3 aluminum alloy:
2024
T3 aluminum alloy is an aluminum-copper-magnesium duralumin-type alloy
with the following approximate mass fractions: Si 0.5, Fe 0.5, Cu 4, Mn
0.9, Mg 1.5, Zn 0.25, Ti 0.15, and the rest is aluminum content. In
addition, it may contain some other elements and impurities.
Specification of aluminium 2024 t3:
2024
T3 aluminum alloy is commonly available in the form of tubes, plates,
rods, aluminum rows, aluminum wires, etc. The specifications can be
customized according to the actual application requirements. Haomei
Aluminum mainly offer 2024 t3 aluminum sheet, 2024 t3 aluminum plate,
2024 t3 aluminum tubes, 2024 t3 aluminum bars and other related products
that used for aircraft industry.
Physical Properties of aluminum 2024 t3:
2024
t3 aluminum alloy has high strength, plasticity, fatigue life, fracture
toughness and resistance to fatigue crack extension. Its hardness,
tensile strength and yield strength are significantly improved in
heat-treated states (e.g. T3/T351 state). For example, its ultimate
tensile strength can reach 58,000-62,000 psi (400-427 MPa), yield
strength is 39,000-40,000 psi (269-276 MPa), and elongation is 10-15%.
Chemical Properties of 2024 t3 aluminium:
The
corrosion resistance of 2024 T3 aluminum alloy is general, in order to
improve its corrosion resistance, anodic oxidation treatment and
painting methods or surface cladding aluminum layer are often used.
Applications of 2024 t3 aluminum:
Due
to the excellent comprehensive performance and high-temperature creep
resistance of 2024 T3 aluminum alloy, it is often used in places where
high strength but low weight ratio is required, such as the skins and
engine compartments of commercial and military aircrafts that are often
subjected to high temperatures of 121~150°C, as well as other aircraft
structural parts with high strength requirements. Also, its good cutting
and machining properties have led to a wide range of applications in
the manufacturing industry.
Please note that specific aluminium 2024 t3 data sheet including alloy compositions, specifications and properties may vary depending on the manufacturer and the specific product, so it is recommended to check the relevant product information or consult a professional according to the actual needs.
This resource is from https://www.aircraft-aluminium.com/a/aluminium-2024-t3-data-sheet.html
Should you be interested in, please contact us at:
Haomei Aluminum
Whatsapp/Wechat: 0086 181 3788 9531
Email: nydia@aluminumhm.com
评论
发表评论