Aluminum checker plate for trailers

 

The 1060 and 3003 aluminum checker plate for trailers are adopted to the trailer panel to achieve anti slid effect. The trailer panel adopts a 2-8mm thick non-slip checkered aluminum plate on the surface of the board to make your transportation safer. The friction coefficient increases, and the friction adhesion is about 2 to 3 times larger than that of the general flat aluminum plate. The design and manufacturing process of the aluminum checkered plate loading platform surface not only reduces the weight of the whole vehicle, but also increases the lifting and loading capacity, and also increases the anti-skid function, which is beautiful and practical.

aluminum checker plate for trailers

The aluminum checker plate for trailers has the characteristics of non-slip, anti-rust and anti-corrosion, durable and beautiful in appearance. If the aluminum checkered plate is used for anti-slip effect, it is necessary to deal with its basic pattern to increase the unevenness of its basic pattern, so that the basic friction force for the aluminum checker plate will be increased, and all kinds of anti-slip of the board are continuously carried out, because the pattern and surface of the checkered plate aluminum are to be carried out to increase the roughness of its surface is the basic reason and the key factor of anti-slip.

 

The classification and characteristics of the aluminum checker plate for trailers:

1, Normal plate:

Normal plate generally refers to ordinary 1000 series aluminum checker plate. The general plate has low mechanical strength (softer) and is easy to dent and deform, and has poor corrosion resistance and wear resistance. However, the general plate has good welding performance and is not easy to crack. In order to ensure that the trailer plate does not appear serious concave deformation, the thickness of aluminum checker plate of trailer is usually 2.0 mm or more.

2, Manganese plate:

Manganese plate is 3003 aluminum checker plate in 3000 series Al-Mn-Mg alloy. The strength, wear and corrosion resistance of 3003 aluminum checker plate is better than that of ordinary plate. The welding performance is similar to that of ordinary plates. The thickness of the manganese plate bottom plate of the semi-trailer is usually above 1.8mm.

For Price Plz Contact Whatsapp/Wechat: 0086 181 3788 9531
Or Email to nydia@aluminium24.eu

评论

发表评论

此博客中的热门博文

Differences between PS and CTP base plate

图片
With the increasing maturity and the rapid development of CTP technology, as well as the declining of price, CTP technology has been more and more welcomed by the majority of printing practitioners, usage of CTP plates have the potential trend to catch up with the traditional PS plate. The overall requirements of the printing plate is very high, especially the current CTP plate is mostly used for high-grade color printing plate, to ensure the quality of the plate, the plate based apparent quality is the premise. The characteristic of CTP technology is the quality of CTP based plate, such as the apparent quality, physical property and electrolytic performance. The aluminum plate base is widely used according to CTP plate technical requirement. The difference between CTP plates and PS plate on the apparent properties of aluminum plate base are as follows. The basic appearance requirements of the aluminum base plate is clean and smooth, no cracks, corrosion pits, air vents, scratches,...
阅读全文

Mill Finish Aluminum Foil 8011 H14 For Bottle Caps

图片
  Mill finish aluminum foil 8011 H14 for bottle caps has good performance and wide range of applications, usually used to make wine and cosmetic bottle caps. 8011 H14 mill finish aluminum foil for bottle cap material is mainly made of 8011 aluminum alloy, with good corrosion resistance and machinability. H14 temper refers to the hardness state of 8011 aluminum alloy after processing, aluminium foil 8011 h14 has a certain degree of hardness and strength. Mill finish means that the surface of aluminum foil is polished to give it a smooth surface and increase the aesthetic appearance. Mill finish 8011 H14 aluminum foil for bottle cap material has good sealing and freshness preservation properties, and is suitable for all kinds of bottle caps. In the production process, mill finish aluminum foil 8011 H14 for bottle caps material is completed through a number of processes such as cold rolling, foil rolling annealed thickness, annealing, foil rolling finished product, bending and st...
阅读全文

Introduction of aluminum foil insulation material

图片
Aluminum foil insulation material is the best thermal insulation material at present in the world. It has the advantages of light weight, low thermal conductivity, good heat resistance, aging resistance, easy combustion with other substrates, bonding does not produce droplet and other excellent properties. On the application, it is widely used in building roofing, wall, ceiling, floor, doors and windows as insulation materials. Aluminum foil itself is a good conductor of heat, directly used basically has no heat insulation, but accelerate the heat loss, so when used the insulation cotton is wrapped inside the aluminum foil . It has the functions of heat insulation, waterproof, moisture-proof and so on. Its solar radiation absorption coefficient is very low, which can insulate most of the heat transfer. Introduction of advantages of aluminum foil insulation material: (1) Simplification of structure to avoid waste. (2) It is unnecessary to set roof exhaust system. (3) Waterproof lay...
阅读全文